Crypto Pki Authenticate - Allied Telesis x510-28GTX Command Reference Manual

P K I C
UBLIC EY NFRASTRUCTURE OMMANDS

CRYPTO PKI AUTHENTICATE

crypto pki authenticate
Overview Use this command to authenticate a trustpoint by generating or importing the
root CA certificate. This must be done before the server can be enrolled to the
trustpoint.
crypto pki authenticate <trustpoint>
Syntax
Mode Privileged Exec
Usage If the trustpoint's enrollment setting is "selfsigned", then this command causes a
private key to be generated for the root CA, and a self-signed certificate to be
generated based on that key.
If the trustpoint's enrollment setting is "terminal", then this command prompts
the user to paste a certificate Privacy Enhanced Mail (PEM) file at the CLI terminal.
If the certificate is a valid selfsigned CA certificate, then it will be stored as the
trustpoint's root CA certificate.
The specified trustpoint must already exist, and its enrollment mode must have
been defined.
Example To show the enrollment setting of a trustpoint named "example" and then
generate a certificate from it, use the commands:
awplus>
awplus#
awplus(config)#
awplus(ca-trustpoint)#
awplus(config)#
awplus#
awplus#
Related crypto pki import pem
Commands
crypto pki trustpoint
enrollment (trustpoint configuration mode)
C613-50170-01 Rev B
Parameter Description
<trustpoint>
The name of the trustpoint to be authenticated.
enable
configure terminal
crypto pki trustpoint example
exit
exit
crypto pki authenticate example
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
enrollment selfsigned
1953