Q
S C
O
OMMANDS
SHOW MLS QOS
show mls qos
Overview
Use this command to display whether QoS is enabled or disabled on the switch.
show mls qos
Syntax
Mode
User Exec and Privileged Exec
Example
To display whether QoS is enabled or disabled, use the command:
awplus#
Output
Figure 40-3: Example output from the show mls qos command
Related
mls qos enable
Commands
C613-50170-01 Rev B
show mls qos
awplus#show mls qos
Enable
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1653