Show Ipv6 Access-List (Ipv6 Software Acls) - Allied Telesis x510-28GTX Command Reference Manual

IP 6 S A C
V OFTWARE CCESS ONTROL
6 - (IP 6 S
SHOW IPV ACCESS LIST V

show ipv6 access-list (IPv6 Software ACLs)

Overview Use this command to display all configured IPv6 access-lists or the IPv6 access-list
specified by name.
show ipv6 access-list [<access-list-name>]
Syntax
show ipv6 access-list standard [<access-list-name>]
show ipv6 access-list extended [<access-list-name>]
Mode User Exec and Privileged Exec
Example To show all configured IPv6 access-lists, use the following command:
awplus#
Output Figure 39-1: Example output from show ipv6 access-list
Example To show the IPv6 access-list named deny_icmp, use the following command:
awplus#
Output Figure 39-2: Example output from show ipv6 access-list for a named ACL
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
ACL )
OFTWARE S
Parameter
<access-list-name>
standard
extended
show ipv6 access-list

IPv6 access-list deny_icmp
deny icmp any any vlan 1

IPv6 access-list deny_ssh
deny tcp abcd::0/64 any eq 22
show ipv6 access-list deny_icmp

IPv6 access-list deny_icmp
deny icmp any any vlan 1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Only display information about an IPv6 access-list with
the specified name.
Only display information about standard access-lists.
Only display information about extended access-lists.
1607