Auth-Web-Server Redirect-Url - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER REDIRECT URL

auth-web-server redirect-url

Overview This command sets a URL for supplicant (client device) authentication. When a
supplicant is authorized it will be automatically redirected to the specified URL.
Note that if the http redirect feature is used then this command is ignored.
Use the no variant of this command to delete the URL string set previously.
Syntax auth-web-server redirect-url <url>
no auth-web-server redirect-url
Default The redirect URL for the Web-Authentication server feature is not set by default
(null).
Mode Global Configuration
Examples To enable and set redirect a URL string www.alliedtelesis.com for the Web-
Authentication server, use the following commands:
awplus#
awplus(config)#
http://www.alliedtelesis.com
To delete a redirect URL string, use the following commands:
awplus#
awplus(config)#
Related auth-web-server redirect-delay-time
Commands
show auth
show auth-web-server
show running-config
C613-50170-01 Rev B
Parameter
<url>
configure terminal
auth-web-server redirect-url
configure terminal
no auth-web-server redirect-url
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
URL (hostname or dotted IP notation).
1799