Show Radius Local-Server Nas - Allied Telesis x510-28GTX Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS
-
SHOW RADIUS LOCAL SERVER NAS

show radius local-server nas

Overview Use this command to display information about NAS (Network Access Servers)
registered to the local RADIUS server.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show radius local-server nas [<ip-address>]
Mode User Exec and Privileged Exec
Example The following command displays NAS information.
awplus#
Output
Table 3: Example output from the show radius local-server nas command
Table 4: Parameters in the output of the show radius local-server nas
Related nas
Commands
C613-50170-01 Rev B
Parameter Description
<ip-address>
Specify NAS IP address for show output.
show radius local-server nas
NAS-Address Shared-Key
----------------------------------------------------------
127.0.0.1 awplus-local-radius-server
command
Parameter Description
NAS-Address
IP address of NAS.
Shared-Key
Shared key used for RADIUS connection.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1943