Debug Epsr - Allied Telesis x510-28GTX Command Reference Manual

E P S
THERNET ROTECTION WITCHED

DEBUG EPSR

debug epsr
Overview This command enables EPSR debugging.
The no variant of this command disables EPSR debugging.
Syntax debug epsr {info|msg|pkt|state|timer|all}
no debug epsr {info|msg|pkt|state|timer|all}
Mode Privileged Exec and Global Configuration
Examples To enable state transition debugging, use the command:
awplus#
To disable EPSR packet debugging, use the command:
awplus#
Related undebug epsr
Commands
C613-50170-01 Rev B
R (EPSR ™) C
ING ING OMMANDS
Parameter Description
info
Send general EPSR information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above information from being sent to the console.
msg
Send the decoded received and transmitted EPSR packets to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
pkt
Send the received and transmitted EPSR packets as raw ASCII text to the
console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
state
Send EPSR state transitions to the console.
Using this parameter with the no debug epsr command will explicitly
exclude state transitions from being sent to the console.
timer
Send EPSR timer information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude timer information from being sent to the console.
all
Send all EPSR debugging information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude any debugging information from being sent to the console.
debug epsr state
no debug epsr pkt
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2150