Access-List (Numbered Hardware Acl For Icmp) - Allied Telesis x510-28GTX Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- (
ACCESS LIST NUMBERED HARDWARE
access-list (numbered hardware ACL for
ICMP)
Overview This command creates an access-list for use with hardware classification. The
access-list will match on ICMP packets that have the specified source and
destination IP addresses and, optionally, ICMP type. You can use the value any
instead of source or destination address if an address does not matter.
Once you have configured the ACL, you can use the
access-group
The optional vlan parameter can be used to match tagged (802.1q) packets.
The no variant of this command removes the previously specified access-list.
access-list <3000-3699> <action> icmp <source-ip> <dest-ip>
Syntax
[icmp-type <number>] [vlan <1-4094>]
no access-list <3000-3699>
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
ACL ICMP)
FOR
command to apply this ACL to a port, VLAN or QoS class-map.
Parameter Description
<3000-3699>
An ID number for this hardware IP access-list.
<action>
The action that the switch will take on matching packets:
deny
permit
copy-to-cpu
copy-to-mirror
send-to-mirror
send-to-vlan-port
vlan <vid> port
<port-number>
send-to-cpu
icmp
Match against ICMP packets
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
access-group or the
Reject packets that match the source
and destination filtering specified
with this command.
Permit packets that match the source
and destination filtering specified
with this command.
Send a copy of matching packets to
the CPU.
Send a copy of matching packets to
the mirror port.
Use the mirror interface command to
configure the mirror port.
Send matching packets to the mirror
port.
Use the mirror interface command to
configure the mirror port.
Send matching packets to the
specified port, tagged with the
specified VLAN. The specified port
must belong to the specified VLAN.
Send matching packets to the CPU.
match
1469