Ip Pim Ignore-Rp-Set-Priority - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM C
OMMANDS
- - -
IP PIM IGNORE RP SET PRIORITY

ip pim ignore-rp-set-priority

Overview Use this command to ignore the RP-SET priority value, and use only the hashing
mechanism for RP selection.
This command is used to inter-operate with older Cisco IOS versions.
Use the no variant of this command to disable this setting.
ip pim ignore-rp-set-priority
Syntax
no ip pim ignore-rp-set-priority
Mode Global Configuration
Example awplus#
awplus(config)#
C613-50170-01 Rev B
configure terminal
ip pim ignore-rp-set-priority
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1339