Ipv6 Pim Register-Rp-Reachability - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 - -
IPV PIM REGISTER RP REACHABILITY

ipv6 pim register-rp-reachability

Overview Use this command to enable the RP reachability check for PIMv6 Register
processing at the DR. The default setting is no checking for RP-reachability.
Use the no variant of this command to disable this processing.
Syntax ipv6 pim register-rp-reachability
no ipv6 pim register-rp-reachability
Default This command is disabled; by default, there is no checking for RP-reachability.
Mode Global Configuration
awplus#
Examples
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
C613-50170-01 Rev B
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim register-rp-reachability
configure terminal
no ipv6 pim register-rp-reachability
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1398