Auth-Web-Server Redirect-Delay-Time - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER REDIRECT DELAY

auth-web-server redirect-delay-time

Overview Use this command to set the delay time in seconds before redirecting the
supplicant to a specified URL when the supplicant is authorized.
Use the variant no to reset the delay time set previously.
Syntax auth-web-server redirect-delay-time <5-60>
no auth-web-server redirect-delay-time
The default redirect delay time is 5 seconds.
Default
Mode Global Configuration
To set the delay time to 60 seconds for the Web-Authentication server, use the
Examples
following commands:
awplus#
awplus(config)#
To reset the delay time, use the following commands:
awplus#
awplus(config)#
Related auth-web-server blocking-mode
Commands
auth-web-server redirect-url
show auth-web-server
show running-config
C613-50170-01 Rev B
-
TIME
Parameter
redirect-delay-time
<5-60>
configure terminal
auth-web-server redirect-delay-time 60
configure terminal
no auth-web-server redirect-delay-time
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Set the delay time before jumping to a specified
URL after the supplicant is authorized.
The time in seconds.
1798