Show Provisioning (Stack) - Allied Telesis x510-28GTX Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING
( )
SHOW PROVISIONING STACK

show provisioning (stack)

Overview Use this command to display the provisioning status of all installed or provisioned
hardware. Provisioning is the preconfiguration necessary to accommodate future
connection of hardware items such as a switch.
show provisioning
Syntax
Mode User Exec and Privileged Exec
Example To show provisioning, use the following command:
awplus#
Output Figure 50-4: Example output from show provisioning
Table 2: Parameters in the output of the show provisioning command
Related show stack
Commands
switch provision (stack)
C613-50170-01 Rev B
™) C
TACK OMMANDS
show provisioning
Switch provisioning summary information

ID Board class Status
1.0 x510-28 Hardware present
Parameter
ID
Board class
Status
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The unit bay-location of the hardware provision.
The hardware type.
The provisioned state:
• Hardware Present means that the hardware is currently
installed in the stack.
• Provisioned means that although the hardware is not
currently installed, the stack is preconfigured ready to
accept the hardware installation.
2078