Debug G8032 - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
8032
DEBUG G

debug g8032

Overview Use this command to enable G.8032 debugging.
Use the no variant of this command to disable G.8032 debugging.
Syntax debug g8032 {all|event|rx|tx}
no debug g8032 {all|event|rx|tx}
Mode Privileged Exec
Example To enable all G.8032 debugging, use the following command:
awplus#
Related show debugging
Commands
show debugging g8032
undebug g8032
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter Description
all
Turn on all G.8032 debugging
event
Turn on G.8032 Event debugging
rx
Turn on G.8032 Receive debugging
tx
Turn on G.8032 Transmit debugging
debug g8032 all
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2182