Debug Pim Dense-Mode All - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
DEBUG PIM DENSE MODE ALL

debug pim dense-mode all

Overview This command enables PIM-DM debugging.
The no variant of this command disables PIM-DM debugging.
Syntax debug pim dense-mode all
no debug pim dense-mode all
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
Output Figure 35-1: Example output from the debug pim dense-mode all command
Validation show debugging pim dense-mode
Commands
Related debug pim dense-mode context
Commands
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif
C613-50170-01 Rev B
configure terminal
debug pim dense-mode all
PIM event debugging is on

PIM MFC debugging is on

PIM state debugging is on

PIM packet debugging is on

PIM incoming packet debugging is on

PIM outgoing packet debugging is on
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1435