G8032 Erp-Instance - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
8032 -
G ERP INSTANCE

g8032 erp-instance

Overview Use this command to create a G.8032 Ethernet Ring Protection (ERP) instance, or to
enter an existing instance's context.
Use the no variant of this command to destroy the specified instance.
Syntax g8032 erp-instance <erp-instance-name>
no g8032 erp-instance <erp-instance-name>
Mode Global Configuration
Usage The ERP protocol in AlliedWare Plus™ can run one or more instances. A G.8032 ERP
instance is made up of:
•
•
•
An ERP instance must be associated with a G.8032 physical ring and a G.8032
profile.
Example To enter the context of an instance named "blue", use the following commands:
awplus(config)#
awplus(g8032-config-switch)#
Related clear g8032 erp-instance
Commands
clear g8032 erp-instance statistics
data-traffic
erp-instance
g8032 forced-switch erp-instance
g8032 manual-switch erp-instance
level (G.8032)
physical-ring
profile name
raps-channel
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter
<erp-instance-name>
two ERP ring ports,
a Control VLAN that carries Ring-Automatic Protection Switching (R-APS)
messages, and
zero, one, or more Protected traffic data VLANs that the instance protects
when the ring fails.
g8032 erp-instance blue
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the G.8032 ERP instance. This can be up to 32
characters.
2186