Delete Stack-Wide Force - Allied Telesis x510-28GTX Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING
-
DELETE STACK WIDE FORCE

delete stack-wide force

Overview Use this command to delete files from all members of a stack.
delete stack-wide force [recursive] <name>
Syntax
Mode Privileged Exec.
Usage This a non-interactive command, so if the specified file or files exist, they are
deleted without question or warning. This is indicated by the mandatory force
parameter.
You can use this command within an AMF working set.
Examples To delete a file "test.scp" that is located in Flash memory on all stack members, use
the following command:
awplus#
To remove directories "output1" and "output2" from an external card on all stack
members, use the following command:
awplus#
Command Version 5.4.7-0.1: command added.
changes
C613-50170-01 Rev B
™) C
TACK OMMANDS
Parameter Description
recursive
Delete directories that match the name, including their contents.
<name>
The name of the files or directories to delete.
The filename can include the wildcard *. Use the wildcard with
caution, because this command does not ask for confirmation
before deleting files.
delete stack-wide force test.scp
delete stack-wide force recursive card:output*
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2066