Displaying And Debugging Rmon - Huawei Quidway S3100 Series Operation Manual

Operation Manual – RMON
Quidway S3100 Series Ethernet Switches
Operation
Add an alarm entry
Add an extended
alarm entry
Enter Ethernet port
view
Add
control entry
Add a
entry
Note:
The rmon alarm and rmon prialarm commands take effect on existing nodes only.
For each port, only one RMON statistics entry can be created. That is, if an RMON
statistics entry is already created for a given port, creation of another entry with a
different index for the same port will not succeed.

1.3 Displaying and Debugging RMON

After the above configuration, you can execute the display command in any view to
display the RMON running status, and verify the effect of the configuration.
rmon alarm entry-number
alarm-variable
sampling-time
absolute } rising-threshold
threshold-value1
event-entry1
falling-threshold
threshold-value2
event-entry2 [ owner text ]
rmon
entry-number
prialarm-formula
prialarm-des sampling-timer
{ delta
changeratio
rising_threshold
threshold-value1
event-entry1
falling_threshold
threshold-value2
event-entry2
{ forever
cycle-period } [ owner text ]
interface
interface-number
rmon history entry-number
a history buckets number interval
sampling-interval [ owner
text ]
statistics rmon
entry-number [ owner text ]
Huawei Technologies Proprietary
Command
{ delta |
prialarm
| absolute |
}
entrytype
| cycle
ethernet
statistics
1-4
Chapter 1 RMON Configuration
Description
Optional
Before adding an alarm entry,
you need to use the rmon
event command to define the
event referenced by the alarm
entry.
Optional
Before adding an extended
alarm entry, you need to use
the rmon event command to
define the event referenced
by the extended alarm entry.
—
Optional
Optional