Poe Profile Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510

2.4 PoE profile Configuration Example

I. Network requirements
Ethernent1/0/1 through Ethernet1/0/10 of the S3928P-PWR-EI switch are used by
users of group A who have the following requirements:
All ports in use can enable PoE function;
Signal cables are used to supply power;
The PoE priority for Ethernet1/0/1 through Ethernet1/0/5 is Critical, whereas The
PoE priority for Ethernet1/0/6 through Ethernet1/0/10 is High.
The maximum power for Ethernet1/0/1 through Ethernet1/0/5 ports is 3000mW,
whereas the maximum power for Ethernet1/0/6 through Ethernet1/0/10 is
15,400mW.
Based on the above requirements, two PoE profiles are made for users of group A.
Apply PoE profile1 for Ethernet1/0/1 through Ethernet 1/0/5;
Apply PoE profile2 for Ethernet1/0/6 through Ethernet 1/0/10.
Ethernet 1/0/1 to Ethernet 1/0/5 Ethernet 1/0/1 to Ethernet 1/0/5
Figure 2-1 PoE profile application
II. Configuration procedure
# Create profile 1, and enter PoE profile view.
S3928P-PWR S3928P-PWR-EI S3928P-PWR S3928P-PWR S3928P-PWR S3928P-PWR-EI S3928P-PWR S3928P-PWR S3928P-PWR S3928P-PWR S3928P-PWR S3928P-PWR-EI S3928P-PWR S3928P-PWR S3928P-PWR S3928P-PWR-EI
IP phone IP phone IP phone IP phone IP phone IP phone IP phone IP phone
IP phone IP phone IP phone IP phone IP phone IP phone IP phone IP phone
IP phone IP phone IP phone IP phone IP phone IP phone IP phone IP phone
IP phone IP phone IP phone IP phone IP phone IP phone IP phone IP phone
Huawei Technologies Proprietary
2-4
Chapter 2 PoE Profile Configuration
Network Network Network Network Network Network Network Network
Network Network Network Network Network Network Network Network
Ethernet 1/0/6 to Ethernet 1/0/10 Ethernet 1/0/6 to Ethernet 1/0/10
AP AP AP AP AP AP AP AP
AP AP AP AP AP AP AP AP
AP AP AP AP AP AP AP AP
AP AP AP AP AP AP AP AP