Configuration Example; Example For Configuring Controllable Multicast - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Step 4 Run the display multicast-profile-apply command to information about a VLAN where a
multicast profile is applied.
----End

4.4 Configuration Example

This section provides configuration examples of controllable multicast.

4.4.1 Example for Configuring Controllable Multicast

Networking Requirements
As shown in
G4 (225.0.0.4) exist in the network connected to the router. You are required to configure users
in VLAN 1 and VLAN 2 to watch G1 and G2,and users in VLAN 3 and VLAN 4 to watch all
multicast groups.
Figure 4-2 Networking diagram of configuring controllable multicast
G1(10.1.1.1,225.0.0.1)
G2(11.1.1.1,225.0.0.1)
VLAN1
Configuration Roadmap
The configuration roadmap is as follows:
Issue 01 (2011-10-26)
Figure 4-2, multicast group G1 (225.0.0.1), G2 (225.0.0.2), G3 (225.0.0.3), and
G3(12.1.1.1,225.0.0.1)
Network
G4(13.1.1.1,225.0.0.1)
Switch
VLAN2 VLAN3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Controllable Multicast Configuration
VLAN4
64