Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Set the history command
buffer size
Set the timeout time for
the user interface
Note that the command level available to users logging into a switch depends on both
the authentication-mode { password | scheme | none } command and the user
privilege level level command, as listed in the following table.
Table 2-5 Determine the command level (A)
Authentication mode
None
(authentication-mode
none)

2.4.2 Configuration Example

I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
Do not authenticate users logging in through the Console port.
Commands of level 2 are available to users logging into the AUX user interface.
The baud rate of the Console port is 19,200 bps.
The screen can contain up to 30 lines.
Operation
history-command
max-size value
idle-timeout
[ seconds ]
Scenario
User type
Users logging
in
Console ports
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection to
minutes
a user interface is terminated
if no operation is performed
in the user interface within 10
minutes.
You
idle-timeout 0 command to
disable the timeout function.
Command
The user
level level command
not executed
through
The user
level level command
already executed
2-7
Description
can use
Command
level
privilege
Level 3
privilege Determined
by the level
argument
the