Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 PoE Profile Configuration Commands
2.1 PoE Profile Configuration Commands
2.1.1 apply poe-profile
Syntax
In system view use the following commands:
apply poe-profile profilename interface interface-type interface-number [ to
interface-type interface-number ]
undo apply poe-profile profilename interface interface-type interface-number [ to
interface-type interface-number ]
In Ethernet port view use the following commands:
apply poe-profile profilename
undo apply poe-profile profilename
View
System view
Parameter
profilename: Name of PoE profile, a string of 1 to 15 characters. It starts with a letter
from a to z or from A to Z, and it cannot be any of reserved keywords like all, interface,
user, undo, and mode.
interface-type interface-number: interface-type indicates type of the interface,
interface-number specifies the port ID.
Description
Use the apply poe-profile command to apply the existing PoE profile configuration to
the specified Ethernet port.
Use the undo apply poe-profile command to cancel the PoE profile configuration for
the specified Ethernet port.
Only one PoE profile can be in use at any time for each Ethernet port.
Huawei Technologies Proprietary
2-1
Chapter 2 PoE Profile Configuration Comma
nds