Mac Address Configuration; Setting Static Address - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
About This Chapter

6.1 Setting Static Address

6.2 Setting Dynamic Address
6.1 Setting Static Address
Use the MAC Address > Static page to configure static MAC addresses. A static address can
be assigned to a specific interface on this switch. Static addresses are bound to the assigned
interface and will not be aging. When an address is seen on another interface, the address will
be ignored and will not be written to the address table.
The static address for a host device can be assigned to a specific port within a specific VLAN.
Use this command to add static addresses to the MAC Address Table. Static addresses have
the following characteristics in a specific VLAN :
To add static MAC address:
1. Click MAC Address > Static. Select Add from the Action list.
2. Specify the VLAN, the port or trunk to which the address will be assigned, and the MAC
address. See
3. Click Apply.
Issue 01 (2011-11-17)
6

MAC Address Configuration

Static addresses are bound to the assigned interface and will not be aging. When a static
address is seen on another interface, the address will be ignored and will not be written
to the address table.
A static address cannot be learned on another port until the address is removed from the
table manually.
Figure 6-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6 MAC Address Configuration
45