Debugging Mac Address Authentication; Configuration Examples; Example For Configuring Web Authentication - Huawei Quidway S9300 Configuration Manual

2 NAC Configuration
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
When a fault occurs during 802.1x authentication, run the following debugging commands in
the user view to locate the fault.
Procedure
l
----End

2.6.4 Debugging MAC Address Authentication

Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
When a fault occurs during MAC address authentication, run the following debugging
commands in the user view to locate the fault.
Procedure
l
----End

2.7 Configuration Examples

This section provides several configuration examples of NAC.

2.7.1 Example for Configuring Web Authentication

2.7.2 Example for Configuring 802.1x Authentication
2.7.3 Example for Configuring MAC Address Authentication
2.7.1 Example for Configuring Web Authentication
2-32
CAUTION
Run the debugging dot1x { all | error | event | info | message | packet } command to
enable debugging of 802.1x authentication packets.
CAUTION
Run the debugging mac-auten { all | error | event | info | message | packet } command
to enable debugging of MAC address authentication packets.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)