Habp Client Configuration; Displaying And Debugging Habp - Huawei Quidway S3100 Series Operation Manual

Operation Manual – 802.1x
Quidway S3100 Series Ethernet Switches
Operation
Configure
current switch to
be an HABP server
Configure
interval
HABP
packets.

2.3 HABP Client Configuration

HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Table 2-2 Configure an HABP client
Operation
Enter system view
Enable HABP

2.4 Displaying and Debugging HABP

You can verify your HABP-related configuration by execute the display command in
any view.
Table 2-3 Display and debug HABP
Display HABP configuration and status information
Display the MAC address table maintained by HABP
Display statistics on HABP traffic
Display HABP debugging information
Command
the
habp server vlan vlan-id
the
to send
habp timer interval
request
Command
system-view
habp enable
Operation
Huawei Technologies Proprietary
Required
By default, a switch operates as
an HABP client after you enable
HABP on the switch, and if you
want to use the switch as a
management switch, you must
configure the switch to be an
HABP server.
Optional
The default interval for an HABP
server to send HABP request
packets is 20 seconds.
-
Required
HABP is disabled by default. And a
switch operates as an HABP client
after you enable HABP for it.
2-2
Chapter 2 HABP Configuration
Description
Description
Command
display habp
display habp table
display habp traffic
display debugging habp