Habp Client Configuration; Displaying Habp - Huawei Quidway S3900 Series Operation Manual

Operation Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Enable HABP
Configure
current switch to
be an HABP server
Configure
interval
HABP
packets.

2.3 HABP Client Configuration

HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Table 2-2 Configure an HABP client
Operation
Enter system view
Enable HABP

2.4 Displaying HABP

After performing the above configuration, you can display and verify your HABP-related
configuration by execute the display command in any view.
Command
habp enable
the
habp server vlan vlan-id
the
to send
habp timer interval
request
Command
system-view
habp enable
Huawei Technologies Proprietary
Required
HABP is enabled by default.
Required
By default, a switch operates
as an HABP client after you
enable HABP on the switch,
and if you want to use the
switch as a management
switch, you must configure the
switch to be an HABP server.
Optional
The default interval for an
HABP server to send HABP
request
seconds.
—
Optional
HABP is enabled by default.
And a switch operates as an
HABP client after you enable
HABP for it.
2-2
Chapter 2 HABP Configuration
Description
packets is
Description
20