Displaying Port Security Configuration; Port Security Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510
Note that:
1) The port-security port-mode autolearn command cannot be configured with the
following features at the same time:
Static and black-hole MAC address
Voice VLAN feature
802.1x feature
port link aggregation
configuration of mirroring reflect port
2) The port-security max-mac-count count-value command cannot be configured
with the mac-address max-mac-count count.

1.3 Displaying Port Security Configuration

After the above-mentioned configuration, you can use the display command in any
view to view the port-security related information, so as to verify configuration result.
Table 1-4 Display port security configuration
Display information about
port security configuration
Display
about
address configuration

1.4 Port Security Configuration Example

I. Network requirements
Enable port security on port Ethernet1/0/1 of switch A
Set the maximum number of the MAC addresses accommodated by the port to 80
Set the port security mode to autolearn
Add the MAC address 0001-0002-0003 of PC1 as Security MAC address to VLAN
1
Operation
the information
Security MAC
Huawei Technologies Proprietary
Chapter 1 Port Security Configuration
Command
display port-security
[ interface interface-list ]
display mac-address security
[ interface interface-type
interface-number ] [ vlan vlan-id ]
[ count ]
1-7
Description
The display
command can be
executed in any
view.