Console Port Login Configuration; Common Configuration - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Figure 2-4 Set port parameters
Turn on the switch. The user will be prompted to press the Enter key if the switch
successfully completes POST (power-on self test). The prompt (such as
<Quidway>) appears after the user presses the Enter key.
You can then configure the switch or check the information about the switch by
executing commands. You can also acquire help by type the ? character. Refer to
the following chapters for information about the commands.

2.3 Console Port Login Configuration

2.3.1 Common Configuration

Table 2-2 lists the common configuration of Console port login.
Table 2-2 Common configuration of Console port login
Console port
configuration
Configuration
Baud rate
Check mode
Stop bits
Data bits
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Description
Optional
The default baud rate is 9,600 bps.
Optional
By default, the check mode of the Console
port is set to "none", which means no check
bit.
Optional
The default stop bits of a Console port is 1.
Optional
The default data bits of a Console port is 8.
2-3