Hdd Format (Memory/Hdd Adjustment); Adj. Data Table - Konica Minolta BIZHUB 501 Service Manual

10. SERVICE MODE
10.7.7

HDD Format (Memory/HDD Adjustment)

Formats HDD.
Note
• When formatting HDD, all the data stored in HDD gets lost and becomes unrecoverable.
A. Procedure
1.
"Service Mode screen"
Press [State Confirmation].
2.
"State Confirmation screen"
Press [Memory/HDD Adjustment].
3. Press [HDD Format] from the menu.
The screen for confirmation is display.
4.
Select the partition [1], [2], [3], [ALL] or [Erase Mode], and Press [Yes].
When formatting is executed and completed, a message "The formatting of HDD is completed" is dis-
played.
NOTE
• The following data are stored in each partition.
1 : Data related to Ptinter (Fonts/spooling space)
2 : Data related to the box (System/User box)
3 : Reserved space (for next expansion of functions)
• When selecting [Erase Mode], the lock password which is set to HDD is canceled and the HDD
formatting is executed for all partitions. When the HDD lock password is not set, only the HDD
formatting for each partition is executed.
5.
Turn OFF the power switch (SW2) and the main power switch (SW1) in this order.
6.
After waiting for 10 seconds or more, turn ON SW1 and SW2 in this order.
Note
• Turning ON SW1 not waiting for 10 seconds or more after turning it OFF may damage HDD. Be
sure to turn ON SW1 10 seconds or more after turning it OFF.
10.7.8

Adj. Data Table

Displays the adjustment data set for this machine.
A. Procedure
1.
"Service Mode screen"
Press [State Confirmation].
2.
"State Confirmation screen"
Press [Adj. Data Table].
3.
"Adj. Data Table screen"
Press [ ↑ ] or [ ↓ ] to display necessary items.
4.
Pressing [NVRAM Value] switches the display into the step number display set and pressing also [Adjust
Value] switches the display into the adjustment value (the value of 1 step x the number of steps).
5.
Press [OK].
228
Field Service Ver.2.0 Mar. 2009