Administrator Settings (G3); System Settings - Power Save Settings - Enter Power Save Mode; System Settings - Output Settings - Print/Fax Output Settings - Fax - Konica Minolta bizhub C652 User Manual

10
10.4

Administrator Settings (G3)

This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this
section also apply to Network Fax.
10.4.1

System Settings - Power Save Settings - Enter Power Save Mode

Select the condition on which the machine shifts to the power save mode.
- Normal: When a fax is received during the power save mode, the fax job is printed. After a
predetermined time has elapsed, the machine shifts to the power save mode.
- Immediately (default): When a fax is received during the power save mode, the fax job is printed and
then the machine immediately shifts to the power save mode.
10.4.2

System Settings - Output Settings - Print/Fax Output Settings - Fax

Specify the printing method for RX documents.
- Batch Print (default): Printing is started after all documents are received.
- Page Print: Printing is made each time a page of document is received.
10-14
Administrator Settings (G3)
bizhub C652/C652DS/C552/C452 (Version 3)
10.4