10
10.4
Administrator Settings (G3)
This section explains Administrator settings specified for G3 fax transmission. The explanation here is
commonly applicable to the network fax function.
10.4.1
System Settings - Power Save Settings - Enter Power Save Mode
Specify conditions for entering power save mode.
-
Normal: If data is received in power save mode, the machine completes printing and then enters power
save mode again after a certain length of time.
-
Immediately (Default): If data is received in power save mode, the machine completes printing and then
immediately enters power save mode again.
10.4.2
System Settings - Output Settings
%
Set up the printing items by Output Setting.
10-16
Administrator mode settings
bizhub 501/421/361 (Version 2)