Administrator Settings (G3); System Settings - Power Save Settings; System Settings - Output Settings - Print/Fax Output Settings - Fax - Konica Minolta bizhub 552 User Manual

10.4

Administrator Settings (G3)

10.4 Administrator Settings (G3)
This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this sec-
tion also apply to Network Fax.
10.4.1

System Settings - Power Save Settings

Select the condition on which the machine shifts to the power save mode.
Item
[Enter Power Save
Mode]
10.4.2

System Settings - Output Settings - Print/Fax Output Settings - Fax

Specify the printing method for RX documents.
- [Batch Print] (default): Printing is started after all documents are received.
- [Page Print]: Printing is made each time a page of document is received.
bizhub 652/552
Description
Select the condition on which the machine shifts to the power save mode.
• [Normal]: When a fax is received during the power save mode, the fax job
is printed. After a predetermined time has elapsed, the machine shifts to
the power save mode.
• [Immediately] (default): When a fax is received during the power save
mode, the fax job is printed and then the machine immediately shifts to
the power save mode.
10
10-13