Defining Names for Speed Dialing Numbers
(optiset E memory only)
1.
2.
You can assign a name to each defined speed dial-
ing number. This name is then displayed in certain
situations; for example, when the speed dialing
number is dialed, or in the case of an incoming call,
when a caller is stored as a system speed dialing
number with a name.
Prerequisite:
System administration has been started (
Check the display. Select "11 System speed dial"
and confirm your selection, or enter the prompted
code.
Check the display. Select "2 Speed dial name"
and confirm your selection or enter the prompted
code.
or
1
1 2
Enter code.
Select memory location (000 - 299 or 000 - 999).
Go to the desired memory location.
or
Press the # key and enter the specific memory lo-
cation.
Confirm your entry.
System Speed Dialing
Æ
20).
27