h3h5_in_the_lan.fm
HiPath 3000/5000 in the LAN Network
Applications over IP
13.9
Applications over IP
13.9.1
Call Detail Recording Central (CDRC) via IP
In HiPath 3000/5000, you can start up the central call data output function only once, which
means that it is available to only one application at a time. Three different modes exist to sup-
port the various requirements of the different applications.
Model-specific data
Topic
Feature available in
Hardware requirements
Software requirements
13.9.1.1
TFTP Client in HiPath 3000/5000
HiPath 3000/5000
TFTP client
Controlled by a programmable timer and a fixed threshold value determining the call data buffer
capacity (around 80 percent of the call data buffer full), the TFTP client (HiPath 3000/5000)
sends call data to the TFTP server (external application). If the system cannot set up a connec-
tion to the TFTP server, it addresses an alternative server. If this server is also unavailable, it
outputs an SNMP trap or error message ("Unable to output data"). The system tries to set up
another connection every 60 seconds. A call data buffer overflow causes an error message to
be entered in the error history file.
13-62
HiPath 3800
HG 1500 / LIMS
V5.0 or later
TFTP protocol
Nur für den internen Gebrauch
HiPath 3550
HiPath 3500
x
x
V1.2 or later
External appli-
cation
TFTP Ser-
ver
Alternative
Server
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
HiPath 3350
HiPath 3300
x
V1.2 or later