Authentication-Type - Dell S6100 Configuration Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage Information Dell Networking recommends keeping the default setting for this command. If you do change the time interval
between VRRP advertisements on one router, change it on all routers.

authentication-type

Enable authentication of VRRP data exchanges.
Syntax authentication-type simple [encryption-type] password
To delete an authentication type and password, use the no authentication-type command.
Parameters
simple
encryption-type
password
Defaults Not configured.
Command Modes VRRP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
1708 Virtual Router Redundancy Protocol (VRRP)
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword simple to specify simple authentication.
(OPTIONAL) Enter one of the following:
• 0 (zero) specifies an unencrypted authentication data follows.
• 7 (seven) specifies a hidden authentication data follows.
• LINE is the unencrypted (cleartext) authentication data.
Enter a character string up to eight characters long as a password. If you do not enter an
encryption-type, the password is stored as clear text.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.