Clear Snmp Notifyfilter; Show Snmp Notifyprofile - Enterasys C3G124-24 Configuration Manual

Mode
Switch mode, read-write, when security profile = normal.
Switch mode, super-user, when security profile = C2.
Usage
See "About SNMP Notify
Example
This example shows how to create an SNMP notify filter called "pilot1" with a MIB subtree ID of
1.3.6:
C3(su)->set snmp notifyfilter pilot1 subtree 1.3.6

clear snmp notifyfilter

Use this command to delete an SNMP notify filter configuration.
Syntax
clear snmp notifyfilter profile subtree oid-or-mibobject
Parameters
profile
subtree oid-or-
mibobject
Defaults
None.
Mode
Switch mode, read-write, when security profile = normal.
Switch mode, super-user, when security profile = C2.
Example
This example shows how to delete the SNMP notify filter "pilot1":
C3(su)->clear snmp notifyfilter pilot1 subtree 1.3.6

show snmp notifyprofile

Use this command to display SNMP notify profile information. This associates target parameters
to an SNMP notify filter to determine who should not receive SNMP notifications.
Syntax
show snmp notifyprofile [profile] [targetparam targetparam] [volatile |
nonvolatile | read-only]
Filters" on page 12-28 for more information about notify filters.
Specifies an SNMP filter notify name to delete.
Specifies a MIB subtree ID containing the filter to be deleted.
clear snmp notifyfilter
Enterasys C3 Configuration Guide 12-33