Clear Port Mdix; Show Port Advertise - Enterasys Matrix DFE-Gold Series Configuration Manual

clear port mdix

clear port mdix
Use this command to reset MDIX mode to the default setting of auto on one or more ports.
Syntax
clear port mdix [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, mode will be reset for all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset 1‐Gigabit Ethernet port 14 in module 3 to auto MDI/MDIX
configuration:
Matrix(rw)->set port mdix ge.3.14

show port advertise

Use this command to display the advertised ability on one or more ports.
Syntax
show port advertise [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, advertised ability for all ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display advertised ability fe.1.16:
Matrix(rw)->show port advertise fe.1.16
fe.1.16
----------------------------------------------
(Optional) Resets mode for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 4‐2.
(Optional) Displays advertised ability for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
capability advertised
Setting Auto-Negotiation and Advertised Ability
remote
Enterasys Matrix DFE-Gold Series Configuration Guide 4-33