clear lldp port status
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns the transmit interval to the default value of 30 seconds.
C3(rw)->clear lldp tx-interval
clear lldp port status
Use this command to return the port status to the default value of both (both transmitting and
processing received LLDPDUs are enabled).
Syntax
clear lldp port status port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns port
processing received LLDPDUs.
C3(rw)->clear lldp port status ge.1.1
clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
Syntax
clear lldp port trap port-string
Parameters
port‐string
Defaults
None.
6-32 Discovery Protocol Configuration
Specifies the port or range of ports to be affected.
1.1 to the default state of enabled for both transmitting and
ge.
Specifies the port or range of ports to be affected.