Telnet Connections - Enterasys Matrix E5 5H153-50-G User Manual

Telnet Connections

2.2 TELNET CONNECTIONS
Prior to accessing a module via a network connection, you must first configure the module with a
valid IP address, subnet mask, and default gateway using an out-of-band connection or the BOOTP
protocol.
Once the module is configured, you can establish a Telnet session from any TCP/IP based node on
the network. Telnet connections to the module require the community name passwords assigned in
the SNMP Configuration screen.
For information about setting the IP address, refer to
For information about assigning community names, refer to
Refer to the instructions included with the Telnet application for information about establishing a
Telnet session.
2-4 Local Management Requirements
Chapter 6.
Chapter 6.