S
C
M
YSTEM
ONFIGURATION AND
SHOW SYSTEM
show system
Overview
This command displays general system information about the device, including
the hardware, installed, memory, and software versions loaded. It also displays
location and contact details when these have been set.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system
Syntax
Mode
User Exec and Privileged Exec
Example
To display configuration information, use the command:
awplus#
Output
Figure 7-17: Example output from show system
awplus#show system
System Status
Board
ID
Bay
--------------------------------------------------------------------------------
Base
369
--------------------------------------------------------------------------------
RAM:
Total: 495792 kB Free: 384904 kB
Flash: 63.0MB Used: 50.9MB Available: 12.1MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime
Bootloader version : 2.0.25
Current software : x510-5.4.5-2.1.rel
Software version : 5.4.5-2.1
Build date : Thu Nov 12 12:11:29 NZDT 2015
Current boot config: flash:/backup.cfg (file exists)
System Name
awplus
System Contact
System Location
Related
show system environment
Commands
C613-50102-01 REV C
C
ONITORING
OMMANDS
show system
Board Name
x510-28GTX
: 0 days 16:31:49
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Guide.
Mon Nov 16 08:42:16 2015
Rev
Serial number
A-0
A24SCA01M
"Getting Started
273