Show Autoboot - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT

SHOW AUTOBOOT

show autoboot
Overview This command displays the Autoboot configuration and status.
show autoboot
Syntax
Mode Privileged Exec
Example To show the Autoboot configuration and status, use the command:
awplus#
Output Figure 2-6:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
USB file autoboot.txt exists

Restore information on USB
Autoboot enable in autoboot.txt
Restore release file
Restore configuration file
Figure 2-7:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
External media source
Related autoboot enable
Commands
create autoboot
show boot
613-50157-01 Rev C
C
OMMANDS
show autoboot
Example output from the show autoboot command
: enabled
: yes
: yes
: FS980-5.4.7-0.1.rel (file exists)
: network_1.cfg (file exists)
Example output from the show autoboot command when an
external media source is not present
: disabled 
: media not found.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
107