F
C
M
ILE AND
ONFIGURATION
ANAGEMENT
SHOW AUTOBOOT
show autoboot
Overview
This command displays the Autoboot configuration and status.
show autoboot
Syntax
Mode
Privileged Exec
Example
To show the Autoboot configuration and status, use the command:
awplus#
Output
Figure 2-6:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
USB file autoboot.txt exists
Restore information on USB
Autoboot enable in autoboot.txt
Restore release file
Restore configuration file
Figure 2-7:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
External media source
Related
autoboot enable
Commands
create autoboot
show boot
C613-50170-01 Rev B
C
OMMANDS
show autoboot
Example output from the show autoboot command
: enabled
: yes
: yes
: x510-5.4.7-1.1.rel (file exists)
: network_1.cfg (file exists)
Example output from the show autoboot command when an
external media source is not present
: enabled
: USB not found.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
141