Show Ip Bgp; Show Ip Bgp Addrfamilyinfo; Show Ip Bgp Aggregate-Address - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.62 show ip bgp

This command displays all the entries in the BGP4 route table.
Format
Mode
PeerId
Prefix/Len
NextHop
VpncosId

14.8.63 show ip bgp addrfamilyinfo

This command displays the Address Family Identifier Info.
Format
Mode
AFI
SAFI

14.8.64 show ip bgp aggregate-address

This command displays all the aggregation entries that are present in the aggregation list.
Format
Mode
Address
Aggregation
Mode
Prefix/Len
14-92
show ip bgp
Privileged EXEC
This displays the Peer ID for this entry in the BGP4 route
table.
This displays the prefix and the prefix length of this entry in
the BGP4 route table.
This displays the Next Hop for this entry in the BGP4 route
table.
This displays the VPN/CoS ID for this entry in the BGP4
route table.
show ip bgp addrfamilyinfo
Privileged EXEC
This displays the Address Family Identifier (AFI).
This displays the Subsequent Address Family Identifier
(SAFI).
show ip bgp aggregate-address
Privileged EXEC
This field displays whether Path Attribute Aggregation is
enabled or disabled.
This field displays the IP address which identifies the net-
work and the prefix length.
v1.0, December 2005
Routing Commands