Show Ip Route; Show Ip Route Bestroutes - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.2.23 show ip route

This command displays the entire route table. This commands takes no options.
Format
Mode
Network Address
Subnet Mask
Protocol
Total Number of
Routes
For each Next Hop
Next Hop Intf
Next Hop IP
Address

14.2.24 show ip route bestroutes

This command causes the entire route table to be displayed. This commands takes no
options.
Format
Mode
Network Address
Subnet Mask
Protocol
Total Number of
Routes
Routing Commands
show ip route
Privileged EXEC
Is an IP address identifying the network on the specified
interface.
Is a mask of the network and host portion of the IP address
for the router interface.
Tells which protocol added the specified route. The possibili-
ties are: local, static, OSPF or RIP.
The total number of routes.
The outgoing router interface to use when forwarding traffic
to the next destination.
The outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
show ip route bestroutes
Privileged EXEC
Is an IP route prefix for the destination.
Is a mask of the network and host portion of the IP address
for the specified interface.
Tells which protocol added the specified route. The possibili-
ties are: local, static, OSPF or RIP.
The total number of routes in the route table.
v1.0, March 2006
14-17