Table of Contents
Advertisement
12. "SYSTEM" mode
12.6.2.3 Initializing the files
The data saved on the controller's flash ROM can be initialized.
n
NOTE
If the data in the internal memory is destroyed for any reason, it can be
restored by loading the backup data from the internal flash ROM. We rec-
ommend backing up the data in the internal flash ROM before starting the
robot system.
Chapter
c
4
CAUTION
• If data is already written in, the data must be saved after the initialization
• The data saved on the internal flash ROM cannot be restored if any
• If an abnormal process occurs, such as if the power is turned OFF while
[Procedure]
1) Press
2) A confirmation message appears on the guidelines.
Press
Press
■ Check of FROM initialization
SYSTEM>BACKUP>FROM>INIT
3) The message "0.5: Accessing" will appear during the procedure.
4-270
process.
hardware trouble occurs. Always save the data onto an external PC
storage device.
initializing the data, then the data cannot be guaranteed.
(INIT) in the "SYSTEM>BACKUP>FROM" mode.
(YES) to initialize the data.
(NO) to cancel the procedure.
No File
Ext
Size
1
FROM
.ALL
311800 06/06/01 17:32
Initialize OK?
V9.00
Data
Time
YES
NO
Advertisement
Table of Contents
