D-Link DXS-3600 Series Reference Manual page 1283

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Current WRED configuration:
eth1/0/1
CoS WRED State
--- ----------
0 Enabled
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
Switch#
116-7 show random-detect drop-counter
This command is used to display the WRED drop counter.
show random-detect drop-counter [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the WRED drop counter.
Example
This example shows how to display the WRED drop counter on eth 1/0/1.
Switch# show random-detect drop-counter interface eth1/0/1
Current WRED Drop Counter:
Interface
----------
Eth1/0/1
Switch#
Exp-weight-constant
-------------------
9
9
9
9
9
9
9
9
Specifies the interface ID for which the WRED drop counter will be
displayed. You can specify multiple interface IDs, which are separated
by commas (,) or hyphens (-). No space is before or after the commas
or hyphens.
Green Yellow
-------- --------
0 5
Profile
-------
1
1
1
1
1
1
1
1
Red
--------
10
1283