Show Ip Igmp Snooping Mrouter - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

show ip igmp snooping mrouter

The show ip igmp snooping mrouter User EXEC mode command displays information on dynamically learned
multicast router interfaces.
Syntax
show ip igmp snooping mrouter [interface vlan-id]
Parameters
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays multicast router interfaces in VLAN 1000.
Console> show ip igmp snooping mrouter interface 1000
VLAN
----
1000
Detected multicast routers that are forbidden statically:
VLAN
----
1000
Ports
-----
1
Ports
-----
9
Page 111