Show Ip Igmp Snooping Mrouter - D-Link xStack DXS-3250 Cli Manual

D-Link CLI Reference Guide

show ip igmp snooping mrouter

The show ip igmp snooping mrouter User EXEC mode command displays information on dynamically learned
multicast device interfaces.
Syntax
show ip igmp snooping mrouter [interface vlan-id]
Parameters
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays multicast device interfaces in VLAN 1000.
Console> show ip igmp snooping mrouter interface 1000
VLAN
----
1000
Detected multicast devices that are forbidden statically:
VLAN
----
1000
Ports
-----
1/1
Ports
-----
1/19
Page 140