Reset Config; Show Boot_File; Show Firmware Information - D-Link DGS-1210 Series Manual

6 Command Line Interface

reset config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DGS-1210-52MP> reset config
% Device will reboot after reset configuration successfully.
DGS-1210-52MP>

show boot_file

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the information of the boot file on the Switch:
DGS-1210-52MP> show boot_file
Bootup Firmware : image_1
Bootup Configuration : config_1
DGS-1210-52MP>

show firmware information

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the firmware information on the Switch:
DGS-1210-52MP> show firmware information
To reset the Switch to the factory default settings.
reset config
All configurations will be reset to the default settings.
None.
None.
To display the information of the boot file on the Switch.
show boot_file
The show boot_file command displays the current information of
boot file on the switch.
None.
None.
To display the firmware information on the Switch.
show firmware information
The show firmware information command displays the current
firmware information on the switch.
None.
None.
154
D-Link Smart Managed Switch User Manual