Show Mpls Ldp Statistic - D-Link DXS-3600-16S Manual

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mpls ldp bindings
FEC: 130.1.1.0/24
In label : 70
Out label : 80
FEC: 172.18.1.0/24
In label : 20
Out label : 30
FEC: 172.18.2.0/24
In label : 50
Out label : 60
Total Entries : 2
DXS-3600-32S#

38-38 show mpls ldp statistic

This command is used to display LDP global statistic information.
show mpls ldp statistic
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mpls ldp statistic
SessionAttempts
SessionRejectedNoHelloErrors :
SessionRejectedAdErrors
SessionRejectedMaxPduErrors
SessionRejectedLRErrors
BadLdpIdentifierErrors
BadPduLengthErrors
BadMessageLengthErrors
BadTlvLengthErrors
MalformedTlvValueErrors
KeepAliveTimerExpErrors
ShutdownReceivedNotifications:
ShutdownSentNotifications
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
EXEC Mode.
Level: 3.
This command is used to display all LDP label binding information.
This example shows how to display all LDP label binding information.
State : Established
Upstream : 30.1.1.3
Downstream: 120.1.1.1
State : Established
Upstream : 10.1.1.2
Downstream: 192.1.1.1
State : Established
Upstream : 20.1.1.3
Downstream: 120.1.1.1
None.
None.
EXEC Mode.
Level: 3.
This command is used to display LDP global statistic information.
This example shows how to display LDP global statistic information.
: 0
0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
0
: 0
367