Optical Drives; Ports And Connectors Specifications; Usb Ports Specifications; Nic Ports Specifications - Dell EMC PowerEdge R240 CHRH4 Installation And Service Manual

Table of Contents

Advertisement

Backplane:
Up to 4 x 3.5-inch SAS, SATA drives, or SSD drives
Up to 4 x 2.5-inch SAS, SATA drives, or SSD drives

Optical drives

The Dell EMC PowerEdge R240 system supports the following optical drives.
Table 20. Supported optical drive type
Supported drive type
Dedicated SATA DVD-ROM drive or DVD +/-RW drive

Ports and connectors specifications

USB ports specifications

Table 21. Dell EMC PowerEdge R240 system USB specifications
Front
USB port type
No. of ports
USB 2.0-compliant
One
port
Micro USB 2.0-
One
compliant port for
iDRAC Direct
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.

NIC ports specifications

The Dell EMC PowerEdge R240 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located
on the back panel.

Serial connector specifications

The Dell EMC PowerEdge R240 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.

VGA ports specifications

The Dell EMC PowerEdge R240 system supports DB-15 VGA connector.
114
Technical specifications
Supported number of drives
One
Rear
USB port type
USB 3.0-compliant
Two
ports
No. of ports
USB port type
Internal USB 3.0-
compliant port
Internal
No. of ports
One

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc poweredge r240

Table of Contents