Table of Contents
Advertisement
Table 7. System Configuration options (continued)
Option
Video screen options
Table 8. Video screen options
Option
LCD Brightness
Security screen options
Table 9. Security screen options
Option
Admin Password
System Password
Internal HDD-0 Password
Strong Password
78
BIOS overview
Description
● Camera—enabled by default
● Secure Digital (SD) card—enabled by default
● Secure Digital (SD) card read-only-mode
● Hard drive Free Fall Protection — enabled by default
● Secure Digital (SD) Boot
Description
Enables you to set the display brightness depending on the
power source—On Battery and On AC. The LCD brightness is
independent for battery and AC adapter. It can be set using
the slider.
Description
Enables you to set, change, or delete the administrator
(admin) password.
NOTE:
You must set the admin password before you set
the system or hard drive password. Deleting the admin
password automatically deletes the system password and
the hard drive password.
NOTE:
Successful password changes take effect
immediately.
Default setting: Not set
Enables you to set, change, or delete the system password.
NOTE:
Successful password changes take effect
immediately.
Default setting: Not set
Enables you to set, change, or delete the paasword on the
system's internal hard disk drive (HDD).
NOTE:
Successful password changes take effect
immediately.
Default setting: Not set
Enables you to enforce the option to always set strong
passwords.
Default Setting: Enable Strong Password is not selected.
NOTE:
If Strong Password is enabled, the Admin and
System passwords must contain at least one uppercase
character, one lowercase character and be at least eight
characters long.
Advertisement
Table of Contents
